Naver Band Channel Setup Guide

[ Registering and Linking a Megalive Studio Channel ]

1. To register a streaming channel in Megalive Studio, click on the Channel button in the left-hand menu.
When the channel list appears, click the + Channel button in the top-right corner.

2. Select the Naver Band option from the channel type list.

3. Check the URL and Stream Key on the Naver Band site.
* The location and button names may change when the website is updated.

3-1. Log in to your account and enter the Band where you want to start a broadcast.
* If you don’t have a Band, create one by clicking the Create button.

3-2. Once inside the Band, click the Write button in the Band Introduction section on the left, then click the Live Broadcast icon in the writing window.

3-3. When the "Start Band Live Broadcast" window appears, click the Generate button and copy the Stream URL and Stream Key.

4. Enter the copied information into the URL and Stream Key fields in the Megalive Studio popup, then click the Save button.

[ S10 Device Connection ]

1. Turn on the S10 device and log in with your Megalive Studio account.

2. Select "Megalive OnAir."

3. Click the "+" button in the top right corner and select "Live Broadcast."

4. Choose the screen orientation (horizontal or vertical) and enter the broadcast title, description, schedule, and thumbnail in order.

5. Select the live broadcast you created.

6. Click the "Channel" button on the right sidebar and click the "Prepare" button for the channel platform where the live stream will be conducted.

* Click Settings > Encoding Settings, then configure the S10 Live settings as follow.

- Video codec : H.264
- Bitrate : 10000 Kbps
- FPS : 30 fps  

7. Once "Prepare" changes to "Connected," click the "Start Live" button in the bottom left corner.

8. Click the Start Live Broadcast button on the Naver Band screen to connect the S10 device with the live broadcast screen.